Moving back - An ounce of prevention - Cleaning - Scratches - Scuffs - First, do not ever wax or soap the stairway except as per these instructions. If you do, a residue of soap or wax may contaminate the surface. This can prevent successful recoating maintenance (every 5 to 20 years). The single coat may not bond to the existing finish if there is wax or soap residue on it. Clean with a broom and damp mop with vinegar and water or Murphy's Oil Soap (dilute 15 to 1). Secondly, do not let wear of the finish progress to the point that the wood itself becomes exposed. Watch the highest traffic spots. After 5 to 20 years (depending on use and maintenance) these high traffic areas will show significant wear. Now is the time to apply two (2 patch coats of oil-based polyurethane to these traffic spots. Then schedule to recoat the entire stairway at your convenience to refresh and rejuvenate the wood beauty and to renew the protective finish. Call StaircaseRefinishing.com. This is a quick, low cost way to make your stairs last indefinitely! So your stairway has been scratched... Now what? - However, if you have a genuine scratch rather than a scuff here's what to do. Use a torn off paper match end and the polyurethanes touch up material that we provided to line out the scratch. Then wipe the wooden stairs perfectly clean so that the polyurethane remains only in the scratch. If the scratch has cut through a colouring stain to the wood, apply similar stain to the scratch prior to applying polyurethane as above. Punctures of the staircase finish as from a broken heel should be treated as scratches. |
Home | About us | FAQ'S | Photo Gallery | Product & Process | Service | Care & Maintenance Terms | Our Clients | Contact Us | Areas Served |